Difference between revisions of "Equipment List"

From the KNI Lab at Caltech
Jump to navigation Jump to search
(hiding RTP link)
(8 intermediate revisions by 5 users not shown)
Line 6: Line 6:
* [[EBPG 5000+: 100 kV Electron Beam Lithography | Electron Beam Pattern Generator: Raith EBPG 5000+ (100 kV)]]
* [[EBPG 5000+: 100 kV Electron Beam Lithography | Electron Beam Pattern Generator: Raith EBPG 5000+ (100 kV)]]
* [[Quanta 200F: SEM, ESEM, Lithography & Probe Station | Nanometer Pattern Generation System: Thermo Fisher Quanta 200F SEM with NPGS (1-30 kV)]]
* [[Quanta 200F: SEM, ESEM, Lithography & Probe Station | Nanometer Pattern Generation System: Thermo Fisher Quanta 200F SEM with NPGS (1-30 kV)]]
* [[Tecnai TF-20: 200 kV TEM, STEM, EDS, EELS, EFTEM & Lithography | Nanometer Pattern Generation System: Thermo Fisher Tecnai TF-20 S/TEM with NPGS (80-200 kV)]]
<!---* [[Tecnai TF-20: 200 kV TEM, STEM, EDS, EELS, EFTEM & Lithography | Nanometer Pattern Generation System: Thermo Fisher Tecnai TF-20 S/TEM with NPGS (80-200 kV)]]--->
===== Ion Beam Lithography =====
===== Ion Beam Lithography =====
* [[ORION NanoFab: Helium, Neon & Gallium FIB | He/Ne/Ga-FIB: Zeiss ORION NanoFab with Raith ELPHY MultiBeam Pattern Generator (5-40 kV He & Ne, 1-30 kV Ga)]]
* [[ORION NanoFab: Helium, Neon & Gallium FIB | He/Ne/Ga-FIB: Zeiss ORION NanoFab with Raith ELPHY MultiBeam Pattern Generator (5-40 kV He & Ne, 1-30 kV Ga)]]
Line 17: Line 17:
* [[Optical Lithography Resources]]
* [[Optical Lithography Resources]]


Hi!


== Deposition ==
== Deposition ==
Line 47: Line 46:


== Microscopy ==
== Microscopy ==
===== KNI Microscopy Policies =====
* [https://caltech.box.com/s/mpsxkxmf5y8wjw9daijwbudeoqkkeudu KNI Microscopy Policies]
===== Guide to Choosing KNI SEMs & FIBs =====
===== Guide to Choosing KNI SEMs & FIBs =====
*[[Guide to Choosing KNI SEMs & FIBs | Consult this guide for help in choosing the best SEMs and FIBs for your work]]
*[[Guide to Choosing KNI SEMs & FIBs | Consult this guide for help in choosing the best SEMs and FIBs for your work]]
Line 59: Line 61:
* [[Nova 600 NanoLab: SEM, Ga-FIB, GIS & Omniprobe|SEM, Ga-FIB, GIS & Omniprobe: Thermo Fisher Nova 600 NanoLab]]
* [[Nova 600 NanoLab: SEM, Ga-FIB, GIS & Omniprobe|SEM, Ga-FIB, GIS & Omniprobe: Thermo Fisher Nova 600 NanoLab]]


===== Transmission Electron Microscopes (TEMs) =====
===== Transmission Electron Microscope (TEM) =====
* [[Tecnai TF-30: 300 kV TEM, STEM, EDS & HAADF | TEM, STEM, EDS & HAADF: Thermo Fisher Tecnai TF-30 (50-300 kV)]]
* [[Tecnai TF-30: 300 kV TEM, STEM, EDS & HAADF | TEM, STEM, EDS & HAADF: Thermo Fisher Tecnai TF-30 (50-300 kV)]]
* [[Tecnai TF-20: 200 kV TEM, STEM, EDS, EELS, EFTEM & Lithography | TEM, STEM, EDS, EELS, EFTEM & Lithography: Thermo Fisher Tecnai TF-20 (40-200 kV)]]
<!---* [[Tecnai TF-20: 200 kV TEM, STEM, EDS, EELS, EFTEM & Lithography | TEM, STEM, EDS, EELS, EFTEM & Lithography: Thermo Fisher Tecnai TF-20 (40-200 kV)]]--->


===== Scanning Probe Microscopes =====
===== Scanning Probe Microscopes =====
Line 75: Line 77:
* [[Tergeo Plus ICP- & CCP-RIE: Oxygen & Argon Plasma Cleaner | Oxygen & Argon Plasma Cleaner (Tergeo Plus ICP- & CCP-RIE) to remove hydrocarbons from surface]]
* [[Tergeo Plus ICP- & CCP-RIE: Oxygen & Argon Plasma Cleaner | Oxygen & Argon Plasma Cleaner (Tergeo Plus ICP- & CCP-RIE) to remove hydrocarbons from surface]]
* [[TEM Sample Preparation Equipment | TEM Sample Preparation Equipment: Polishing Stations, 3 mm Disk Cutter, Dimpler, Argon Ion Mill]]
* [[TEM Sample Preparation Equipment | TEM Sample Preparation Equipment: Polishing Stations, 3 mm Disk Cutter, Dimpler, Argon Ion Mill]]
===== Stubs for specimen mounting =====
* Stubs used for mounting specimens are considered a personal, consumable item in the KNI. There are some stubs at each Microscope which can be used by any KNI microscopy user. You can also buy your own stubs so that you can keep them clean and available to you. There are many stub geometries and configurations. If you chose to buy your own stubs, please show them to the staff microscopist prior to using them: some stubs including stubs with copper clips have large height differences and can only be used safely in specific operating conditions.
** [https://www.tedpella.com/sem_html/SEMpinmount.htm Buy stubs without copper clips]


== Wet Chemistry ==
== Wet Chemistry ==
===== Wet Chemistry Main page=====
* [[Wet Chemistry | Wet Chemistry page:]] - Facilities, Procedures & Safety, Chemical Lists
* [[Wet Chemistry | Wet Chemistry page:]] - Facilities, Procedures & Safety, Chemical Lists
===== Wet Chemistry Safety page=====
* [[Wet Chemistry Safety | Wet Chemistry Safety page]] - Requesting new chemical, PPE Overview, Hazardous Waste Handling and Labeling, Decanting Chemicals, Hot Plate Rules, Buddy System, Secondary Containment and Other Best Practices.
* [[Wet Chemistry Safety | Wet Chemistry Safety page]] - Requesting new chemical, PPE Overview, Hazardous Waste Handling and Labeling, Decanting Chemicals, Hot Plate Rules, Buddy System, Secondary Containment and Other Best Practices.
===== Wet Chemistry Resources page=====
* [[Wet Chemistry Resources | Wet Chemistry Resources page]] - Contains fabrication recipes and procedures.
* [[Wet Chemistry Resources | Wet Chemistry Resources page]] - Contains fabrication recipes and procedures.


Line 86: Line 96:
===== Thermal Processing =====
===== Thermal Processing =====
* [[Tube Furnaces for Wet & Dry Processing | Tube Furnaces: Tystar Tytan 1 & 2 (Wet & Dry Oxidation and Annealing)]]
* [[Tube Furnaces for Wet & Dry Processing | Tube Furnaces: Tystar Tytan 1 & 2 (Wet & Dry Oxidation and Annealing)]]
* [[Rapid Thermal Processor | Rapid Thermal Processing: Modular Process Technology RTP-600S]]
<!---* [[Rapid Thermal Processor | Rapid Thermal Processing: Modular Process Technology RTP-600S]]--->
===== Substrate Processing =====
===== Substrate Processing =====
* [[Scriber-Breaker | Scriber-Breaker: Dynatex GST-150]]
* [[Scriber-Breaker | Scriber-Breaker: Dynatex GST-150]]

Revision as of 19:33, 10 January 2022

NOTE: For EQUIPMENT TRAINING, contact the tool owner via Email for scheduling - DO NOT USE Labrunr - Training Sessions.

Lithography

Electron Beam Lithography
Ion Beam Lithography
Optical Lithography


Deposition

Evaporation
Sputtering
Chemical Vapor Deposition (CVD)
Dielectric Packaging / Moisture Barrier

Etching

Dry Etching
Wet Etching

Microscopy

KNI Microscopy Policies
Guide to Choosing KNI SEMs & FIBs
Focused Ion Beam (FIB) Systems
Scanning Electron Microscopes (SEMs)
Transmission Electron Microscope (TEM)
Scanning Probe Microscopes
Optical Characterization
Sample Preparation for Microscopy
Stubs for specimen mounting
  • Stubs used for mounting specimens are considered a personal, consumable item in the KNI. There are some stubs at each Microscope which can be used by any KNI microscopy user. You can also buy your own stubs so that you can keep them clean and available to you. There are many stub geometries and configurations. If you chose to buy your own stubs, please show them to the staff microscopist prior to using them: some stubs including stubs with copper clips have large height differences and can only be used safely in specific operating conditions.

Wet Chemistry

Wet Chemistry Main page
Wet Chemistry Safety page
  • Wet Chemistry Safety page - Requesting new chemical, PPE Overview, Hazardous Waste Handling and Labeling, Decanting Chemicals, Hot Plate Rules, Buddy System, Secondary Containment and Other Best Practices.
Wet Chemistry Resources page

Support Tools

Laboratory Data
Thermal Processing
Substrate Processing
Device Processing
Metrology
Sample Preparation