Difference between revisions of "Equipment List"

From the KNI Lab at Caltech
Jump to navigation Jump to search
Line 62: Line 62:
  
 
===== Sample Preparation for Microscopy =====
 
===== Sample Preparation for Microscopy =====
* [[Leica EM ACE600: Carbon Evaporator | Carbon Evaporator (Leica EM ACE600) to make samples conductive]]
+
* [[Carbon Evaporator | Carbon Evaporator (Leica EM ACE600) to make samples conductive]]
 
* [[Tergeo Plus ICP- & CCP-RIE: Oxygen & Argon Plasma Cleaner | Oxygen & Argon Plasma Cleaner (Tergeo Plus ICP- & CCP-RIE) to remove hydrocarbons from surface]]
 
* [[Tergeo Plus ICP- & CCP-RIE: Oxygen & Argon Plasma Cleaner | Oxygen & Argon Plasma Cleaner (Tergeo Plus ICP- & CCP-RIE) to remove hydrocarbons from surface]]
 
* [[TEM Sample Preparation Equipment | TEM Sample Preparation Equipment: Polishing Stations, 3 mm Disk Cutter, Dimpler, Argon Ion Mill]]
 
* [[TEM Sample Preparation Equipment | TEM Sample Preparation Equipment: Polishing Stations, 3 mm Disk Cutter, Dimpler, Argon Ion Mill]]

Revision as of 01:45, 22 May 2019

Lithography

Electron Beam Lithography
Ion Beam Lithography
Optical Lithography

Deposition

Evaporation
Sputtering
Chemical Vapor Deposition (CVD)
Dielectric Packaging / Moisture Barrier

Etching

Dry Etching
Wet Etching

Microscopy

Focused Ion Beam (FIB) Systems
Scanning Electron Microscopes (SEMs)
Transmission Electron Microscopes (TEMs)
Scanning Probe Microscopes
Optical Characterization
Sample Preparation for Microscopy

Support Tools

Thermal Processing
Substrate Processing
Device Processing
Sample Preparation