Carbon Evaporator - Revision history

Derose: /* Sample Preparation for Microscopy */

2026-09-09T15:40:03Z

Sample Preparation for Microscopy

← Older revision		Revision as of 15:40, 9 September 2026
Line 59:		Line 59:
	* [[Tergeo Plus ICP- & CCP-RIE: Oxygen & Argon Plasma Cleaner \| Oxygen & Argon Plasma Cleaner (Tergeo Plus ICP- & CCP-RIE) to remove hydrocarbons from surface]]		* [[Tergeo Plus ICP- & CCP-RIE: Oxygen & Argon Plasma Cleaner \| Oxygen & Argon Plasma Cleaner (Tergeo Plus ICP- & CCP-RIE) to remove hydrocarbons from surface]]
	* [[Carbon Evaporator \| Carbon Evaporator (Leica EM ACE600) to make samples conductive]]		* [[Carbon Evaporator \| Carbon Evaporator (Leica EM ACE600) to make samples conductive]]
	* [[TEM Sample Preparation Equipment \| TEM Sample Preparation Equipment: Polishing Stations, 3 mm Disk Cutter, Dimpler, Argon Ion Mill]]
	===== Scanning Electron & Ion Microscopes =====		===== Scanning Electron & Ion Microscopes =====
	* [[Nova 600 NanoLab: SEM, Ga-FIB, GIS & Omniprobe\|Nova 600 NanoLab: SEM, Ga-FIB, GIS & Omniprobe]]		* [[Nova 600 NanoLab: SEM, Ga-FIB, GIS & Omniprobe\|Nova 600 NanoLab: SEM, Ga-FIB, GIS & Omniprobe]]

Ykim3: /* SOP & Troubleshooting */

2026-01-14T17:15:45Z

SOP & Troubleshooting

← Older revision		Revision as of 17:15, 14 January 2026
Line 34:		Line 34:

	===== SOP & Troubleshooting =====		===== SOP & Troubleshooting =====
	* [https://caltech.app.box.com/file/~~2101406320184~~ Updated SOP]		* [https://caltech.app.box.com/file/2102569954808 Updated SOP (01/14/2026)]
	* The procedure to install a new carbon thread can be found on [https://caltech.app.box.com/file/725150718178?s=xx5psvz8u0jqszdqhh44fd5xkxmhz4a6 Manual page 47]		* The procedure to install a new carbon thread can be found on [https://caltech.app.box.com/file/725150718178?s=xx5psvz8u0jqszdqhh44fd5xkxmhz4a6 Manual page 47]
	** Note: always install as a "double thread," i.e. double the thread back over itself before installing – a thread length that is approximately twice the length of the evaporator's door width is long enough to double over and install.		** Note: always install as a "double thread," i.e. double the thread back over itself before installing – a thread length that is approximately twice the length of the evaporator's door width is long enough to double over and install.

Ykim3: /* SOP & Troubleshooting */

2026-01-14T17:14:49Z

SOP & Troubleshooting

← Older revision		Revision as of 17:14, 14 January 2026
Line 34:		Line 34:

	===== SOP & Troubleshooting =====		===== SOP & Troubleshooting =====
	* [https://caltech.app.box.com/file/2101406320184 SOP]		* [https://caltech.app.box.com/file/2101406320184 Updated SOP]
	* The procedure to install a new carbon thread can be found on [https://caltech.app.box.com/file/725150718178?s=xx5psvz8u0jqszdqhh44fd5xkxmhz4a6 Manual page 47]		* The procedure to install a new carbon thread can be found on [https://caltech.app.box.com/file/725150718178?s=xx5psvz8u0jqszdqhh44fd5xkxmhz4a6 Manual page 47]
	** Note: always install as a "double thread," i.e. double the thread back over itself before installing – a thread length that is approximately twice the length of the evaporator's door width is long enough to double over and install.		** Note: always install as a "double thread," i.e. double the thread back over itself before installing – a thread length that is approximately twice the length of the evaporator's door width is long enough to double over and install.

Ykim3: /* SOP & Troubleshooting */

2026-01-13T18:19:52Z

SOP & Troubleshooting

← Older revision		Revision as of 18:19, 13 January 2026
Line 34:		Line 34:

	===== SOP & Troubleshooting =====		===== SOP & Troubleshooting =====
	* [https://caltech.app.box.com/file/~~2100395303594~~ SOP]		* [https://caltech.app.box.com/file/2101406320184 SOP]
	* The procedure to install a new carbon thread can be found on [https://caltech.app.box.com/file/725150718178?s=xx5psvz8u0jqszdqhh44fd5xkxmhz4a6 Manual page 47]		* The procedure to install a new carbon thread can be found on [https://caltech.app.box.com/file/725150718178?s=xx5psvz8u0jqszdqhh44fd5xkxmhz4a6 Manual page 47]
	** Note: always install as a "double thread," i.e. double the thread back over itself before installing – a thread length that is approximately twice the length of the evaporator's door width is long enough to double over and install.		** Note: always install as a "double thread," i.e. double the thread back over itself before installing – a thread length that is approximately twice the length of the evaporator's door width is long enough to double over and install.

Ykim3: /* SOP & Troubleshooting */

2026-01-12T22:01:14Z

SOP & Troubleshooting

← Older revision		Revision as of 22:01, 12 January 2026
Line 34:		Line 34:

	===== SOP & Troubleshooting =====		===== SOP & Troubleshooting =====
	* [https://caltech.box.com/s/~~1l8kxgkiti1kgmvysl2tpu68r1desi8m~~ SOP]		* [https://caltech.app.box.com/file/2100395303594 SOP]
	* The procedure to install a new carbon thread can be found on [https://caltech.app.box.com/file/725150718178?s=xx5psvz8u0jqszdqhh44fd5xkxmhz4a6 Manual page 47]		* The procedure to install a new carbon thread can be found on [https://caltech.app.box.com/file/725150718178?s=xx5psvz8u0jqszdqhh44fd5xkxmhz4a6 Manual page 47]
	** Note: always install as a "double thread," i.e. double the thread back over itself before installing – a thread length that is approximately twice the length of the evaporator's door width is long enough to double over and install.		** Note: always install as a "double thread," i.e. double the thread back over itself before installing – a thread length that is approximately twice the length of the evaporator's door width is long enough to double over and install.

Ykim3: /* SOP & Troubleshooting */

2026-01-12T21:21:06Z

SOP & Troubleshooting

← Older revision		Revision as of 21:21, 12 January 2026
Line 34:		Line 34:

	===== SOP & Troubleshooting =====		===== SOP & Troubleshooting =====
	* [https://caltech.box.com/s/1l8kxgkiti1kgmvysl2tpu68r1desi8m SOP ~~& Troubleshooting Guide~~]		* [https://caltech.box.com/s/1l8kxgkiti1kgmvysl2tpu68r1desi8m SOP]
	* The procedure to install a new carbon thread can be found on [https://caltech.app.box.com/file/725150718178?s=xx5psvz8u0jqszdqhh44fd5xkxmhz4a6 Manual page 47]		* The procedure to install a new carbon thread can be found on [https://caltech.app.box.com/file/725150718178?s=xx5psvz8u0jqszdqhh44fd5xkxmhz4a6 Manual page 47]
	** Note: always install as a "double thread," i.e. double the thread back over itself before installing – a thread length that is approximately twice the length of the evaporator's door width is long enough to double over and install.		** Note: always install as a "double thread," i.e. double the thread back over itself before installing – a thread length that is approximately twice the length of the evaporator's door width is long enough to double over and install.

Ykim3: /* SOP & Troubleshooting */

2026-01-12T21:20:25Z

SOP & Troubleshooting

← Older revision		Revision as of 21:20, 12 January 2026
Line 35:		Line 35:
	===== SOP & Troubleshooting =====		===== SOP & Troubleshooting =====
	* [https://caltech.box.com/s/1l8kxgkiti1kgmvysl2tpu68r1desi8m SOP & Troubleshooting Guide]		* [https://caltech.box.com/s/1l8kxgkiti1kgmvysl2tpu68r1desi8m SOP & Troubleshooting Guide]
	* The procedure to install a new carbon thread can be found on [https://caltech.app.box.com/file/725150718178?s=xx5psvz8u0jqszdqhh44fd5xkxmhz4a6] page 47		* The procedure to install a new carbon thread can be found on [https://caltech.app.box.com/file/725150718178?s=xx5psvz8u0jqszdqhh44fd5xkxmhz4a6 Manual page 47]
	** Note: always install as a "double thread," i.e. double the thread back over itself before installing – a thread length that is approximately twice the length of the evaporator's door width is long enough to double over and install.		** Note: always install as a "double thread," i.e. double the thread back over itself before installing – a thread length that is approximately twice the length of the evaporator's door width is long enough to double over and install.

Ykim3: /* SOP & Troubleshooting */

2026-01-12T21:19:32Z

SOP & Troubleshooting

← Older revision		Revision as of 21:19, 12 January 2026
Line 35:		Line 35:
	===== SOP & Troubleshooting =====		===== SOP & Troubleshooting =====
	* [https://caltech.box.com/s/1l8kxgkiti1kgmvysl2tpu68r1desi8m SOP & Troubleshooting Guide]		* [https://caltech.box.com/s/1l8kxgkiti1kgmvysl2tpu68r1desi8m SOP & Troubleshooting Guide]
	* The procedure to install a new carbon thread can be found on [https://caltech.app.box.com/file/725150718178?s=xx5psvz8u0jqszdqhh44fd5xkxmhz4a6]# page		* The procedure to install a new carbon thread can be found on [https://caltech.app.box.com/file/725150718178?s=xx5psvz8u0jqszdqhh44fd5xkxmhz4a6] page 47
	** Note: always install as a "double thread," i.e. double the thread back over itself before installing – a thread length that is approximately twice the length of the evaporator's door width is long enough to double over and install.		** Note: always install as a "double thread," i.e. double the thread back over itself before installing – a thread length that is approximately twice the length of the evaporator's door width is long enough to double over and install.

Ykim3: /* SOP & Troubleshooting */

2026-01-12T21:18:59Z

SOP & Troubleshooting

← Older revision		Revision as of 21:18, 12 January 2026
Line 35:		Line 35:
	===== SOP & Troubleshooting =====		===== SOP & Troubleshooting =====
	* [https://caltech.box.com/s/1l8kxgkiti1kgmvysl2tpu68r1desi8m SOP & Troubleshooting Guide]		* [https://caltech.box.com/s/1l8kxgkiti1kgmvysl2tpu68r1desi8m SOP & Troubleshooting Guide]
	* The procedure to install a new carbon thread can be found on [https://caltech.app.box.com/file/725150718178?s=xx5psvz8u0jqszdqhh44fd5xkxmhz4a6]		* The procedure to install a new carbon thread can be found on [https://caltech.app.box.com/file/725150718178?s=xx5psvz8u0jqszdqhh44fd5xkxmhz4a6]# page
	** Note: always install as a "double thread," i.e. double the thread back over itself before installing – a thread length that is approximately twice the length of the evaporator's door width is long enough to double over and install.		** Note: always install as a "double thread," i.e. double the thread back over itself before installing – a thread length that is approximately twice the length of the evaporator's door width is long enough to double over and install.

Ykim3: /* SOP & Troubleshooting */

2026-01-12T21:18:01Z

SOP & Troubleshooting

← Older revision		Revision as of 21:18, 12 January 2026
Line 35:		Line 35:
	===== SOP & Troubleshooting =====		===== SOP & Troubleshooting =====
	* [https://caltech.box.com/s/1l8kxgkiti1kgmvysl2tpu68r1desi8m SOP & Troubleshooting Guide]		* [https://caltech.box.com/s/1l8kxgkiti1kgmvysl2tpu68r1desi8m SOP & Troubleshooting Guide]
	* The procedure to install a new carbon thread can be found on [https://~~www~~.~~manualslib~~.com/~~manual~~/~~1525180/Leica-Em-Ace600.html~~?~~page~~=~~43#manual Page 39 of the Operating Manual~~]		* The procedure to install a new carbon thread can be found on [https://caltech.app.box.com/file/725150718178?s=xx5psvz8u0jqszdqhh44fd5xkxmhz4a6]
	** Note: always install as a "double thread," i.e. double the thread back over itself before installing – a thread length that is approximately twice the length of the evaporator's door width is long enough to double over and install.		** Note: always install as a "double thread," i.e. double the thread back over itself before installing – a thread length that is approximately twice the length of the evaporator's door width is long enough to double over and install.

← Older revision		Revision as of 15:40, 9 September 2026
Line 59:		Line 59:
	* [[Tergeo Plus ICP- & CCP-RIE: Oxygen & Argon Plasma Cleaner \| Oxygen & Argon Plasma Cleaner (Tergeo Plus ICP- & CCP-RIE) to remove hydrocarbons from surface]]		* [[Tergeo Plus ICP- & CCP-RIE: Oxygen & Argon Plasma Cleaner \| Oxygen & Argon Plasma Cleaner (Tergeo Plus ICP- & CCP-RIE) to remove hydrocarbons from surface]]
	* [[Carbon Evaporator \| Carbon Evaporator (Leica EM ACE600) to make samples conductive]]		* [[Carbon Evaporator \| Carbon Evaporator (Leica EM ACE600) to make samples conductive]]
	* [[TEM Sample Preparation Equipment \| TEM Sample Preparation Equipment: Polishing Stations, 3 mm Disk Cutter, Dimpler, Argon Ion Mill]]
	===== Scanning Electron & Ion Microscopes =====		===== Scanning Electron & Ion Microscopes =====
	* [[Nova 600 NanoLab: SEM, Ga-FIB, GIS & Omniprobe\|Nova 600 NanoLab: SEM, Ga-FIB, GIS & Omniprobe]]		* [[Nova 600 NanoLab: SEM, Ga-FIB, GIS & Omniprobe\|Nova 600 NanoLab: SEM, Ga-FIB, GIS & Omniprobe]]