Bert Mendoza - Revision history

Tkimoto: /* Role in the KNI */

2025-06-02T16:58:56Z

Role in the KNI

@@ Line 11: / Line 11: @@
 == About ==
 ===== Role in the KNI =====
-Bert Mendoza is the Lab Coordinator and the Safety Officer for The Kavli Nanoscience Institute (KNI) at The California Institute of Technology. In his role he assists with daily laboratory operations, training new KNI Laboratory members and maintaining KNI Laboratory supplies.  Direct equipment responsibilities include: Suss MA6/BA6 Mask Aligners, GCA 6300 DSW Stepper, Heidelberg DWL-66 Laser Lithography, Tousimis 915B Critical Point Dryer, Dynatex GST-150 Scriber/Breaker, WestBond 7476D Wire Bonder, XeF<sub>2</sub> Silicon Etcher. He is also responsible for overlooking the Wet Chemistry Room and Optical Lithography rooms.
+Bert Mendoza wass the Lab Coordinator and the Safety Officer for The Kavli Nanoscience Institute (KNI) at The California Institute of Technology. In his role he assisted with daily laboratory operations, trained new KNI Laboratory members and maintained KNI Laboratory supplies.  Direct equipment responsibilities included: Suss MA6/BA6 Mask Aligners, GCA 6300 DSW Stepper, Heidelberg DWL-66 Laser Lithography, Tousimis 915B Critical Point Dryer, Dynatex GST-150 Scriber/Breaker, WestBond 7476D Wire Bonder, XeF<sub>2</sub> Silicon Etcher. He was also responsible for overlooking the Wet Chemistry Room and Optical Lithography rooms.
-Bert joined Caltech in March 2017 in his current role at the KNI.
+Bert joined Caltech in March 2017.
 ===== Experience =====
@@ Line 21: / Line 21: @@
 Bert worked for Rockwell International, Conexant and Jazz Semiconductor in the Newport Beach facility for over 25 years combined. Most of his experience is from process engineering departments. Areas of experience include photolithography, wet and dry etching, thin films (furnace and deposition tools), ion implantation, final device testing, and chemical-mechanical polishing.

Tkimoto at 16:57, 2 June 2025

2025-06-02T16:57:18Z

← Older revision		Revision as of 16:57, 2 June 2025
Line 3:		Line 3:
	\|StaffName = Bert Mendoza		\|StaffName = Bert Mendoza
	\|StaffPhoto = Bert-Mendoza.jpg		\|StaffPhoto = Bert-Mendoza.jpg
	\|JobTitle = Laboratory Coordinator		\|JobTitle = Laboratory Coordinator (former)
	\|AreasResponsibility = ~~Lab Safety & Coordination,<br>Wet Chemistry, Photolithography~~		\|AreasResponsibility =
	\|CaltechID = ~~bertm~~		\|CaltechID =
	\|Phone = ~~626-395-4075 (office)<br>626-491-2970 (cell)~~		\|Phone =
	\|OfficeLocation = ~~124 Steele~~		\|OfficeLocation =
	}}		}}
	== About ==		== About ==

Matthew at 07:05, 5 June 2019

2019-06-05T07:05:19Z

← Older revision		Revision as of 07:05, 5 June 2019
Line 11:		Line 11:
	== About ==		== About ==
	===== Role in the KNI =====		===== Role in the KNI =====
	Bert Mendoza is the Lab Coordinator and the Safety Officer for The Kavli Nanoscience Institute (KNI) at The California Institute of Technology. In his role he assists with daily laboratory operations, training new KNI ~~laboratory~~ members and maintaining KNI ~~laboratory~~ supplies. Direct equipment responsibilities include: Suss MA6/BA6 Mask Aligners, GCA 6300 DSW Stepper, Heidelberg DWL-66 Laser Lithography, Tousimis 915B Critical Point Dryer, Dynatex GST-150 Scriber/Breaker, WestBond 7476D Wire Bonder, XeF<sub>2</sub> Silicon Etcher. He is also responsible for overlooking the Wet Chemistry Room and Optical Lithography rooms.		Bert Mendoza is the Lab Coordinator and the Safety Officer for The Kavli Nanoscience Institute (KNI) at The California Institute of Technology. In his role he assists with daily laboratory operations, training new KNI Laboratory members and maintaining KNI Laboratory supplies. Direct equipment responsibilities include: Suss MA6/BA6 Mask Aligners, GCA 6300 DSW Stepper, Heidelberg DWL-66 Laser Lithography, Tousimis 915B Critical Point Dryer, Dynatex GST-150 Scriber/Breaker, WestBond 7476D Wire Bonder, XeF<sub>2</sub> Silicon Etcher. He is also responsible for overlooking the Wet Chemistry Room and Optical Lithography rooms.

	Bert joined Caltech in March 2017 in his current role at the KNI.		Bert joined Caltech in March 2017 in his current role at the KNI.

	===== Experience =====		===== Experience =====
	Before working for the ~~Kavli Nanoscience Institute~~, Bert worked for Caelux Corporation for 5 years as a ~~Process Engineer~~. He also processed in the KNI laboratory as a ~~Corporate Member~~ during that time. At Caelux, Bert maintained the lab equipment and support systems for the cleanroom laboratory along with his duties of processing ~~Silicon~~ wafers.		Before working for the KNI, Bert worked for Caelux Corporation for five years as a process engineer. He also processed in the KNI laboratory as a corporate member during that time. At Caelux, Bert maintained the lab equipment and support systems for the cleanroom laboratory along with his duties of processing silicon wafers.

	Bert worked for Sepulveda Investment Properties as a ~~Maintenance Technician~~ from 2007 to 2012. Part of his duties included~~: General Construction~~, ~~Installation~~ of ~~Mechanical Equipment~~ and ~~Maintaining Rental Properties~~.		Bert worked for Sepulveda Investment Properties as a maintenance technician from 2007 to 2012. Part of his duties included general construction, installation of mechanical equipment, and maintaining rental properties.

	Bert ~~has~~ worked for Rockwell International, Conexant and Jazz Semiconductor in the Newport Beach facility for over 25 years combined. Most of his experience is from ~~the Process Engineering Department~~. Areas of experience include~~: Photolithography~~, ~~Wet~~ and ~~Dry Etching~~, ~~Thin Films~~ (furnace and deposition tools), ~~Ion Implant~~, ~~Final Device Testing~~ and ~~Chemical Mechanical Polishing~~.		Bert worked for Rockwell International, Conexant and Jazz Semiconductor in the Newport Beach facility for over 25 years combined. Most of his experience is from process engineering departments. Areas of experience include photolithography, wet and dry etching, thin films (furnace and deposition tools), ion implantation, final device testing, and chemical-mechanical polishing.

	== List of Managed Instruments ==		== List of Managed Instruments ==

Bertm: /* Experience */

2019-05-29T18:04:17Z

Experience

← Older revision		Revision as of 18:04, 29 May 2019
Line 16:		Line 16:

	===== Experience =====		===== Experience =====
	Before working for the Kavli Nanoscience Institute, Bert worked for Caelux Corporation for 5 years as a Process Engineer. He also processed in the KNI as a Corporate Member during that time. At Caelux, Bert maintained the lab equipment and support systems for the cleanroom laboratory along with his duties of processing Silicon wafers.		Before working for the Kavli Nanoscience Institute, Bert worked for Caelux Corporation for 5 years as a Process Engineer. He also processed in the KNI laboratory as a Corporate Member during that time. At Caelux, Bert maintained the lab equipment and support systems for the cleanroom laboratory along with his duties of processing Silicon wafers.

	Bert worked for Sepulveda Investment Properties as a Maintenance Technician from 2007 to 2012. Part of his duties included: General Construction, Installation of Mechanical Equipment and Maintaining Rental Properties.		Bert worked for Sepulveda Investment Properties as a Maintenance Technician from 2007 to 2012. Part of his duties included: General Construction, Installation of Mechanical Equipment and Maintaining Rental Properties.

Bertm: /* Role in the KNI */

2019-05-29T15:08:19Z

Role in the KNI

← Older revision		Revision as of 15:08, 29 May 2019
Line 13:		Line 13:
	Bert Mendoza is the Lab Coordinator and the Safety Officer for The Kavli Nanoscience Institute (KNI) at The California Institute of Technology. In his role he assists with daily laboratory operations, training new KNI laboratory members and maintaining KNI laboratory supplies. Direct equipment responsibilities include: Suss MA6/BA6 Mask Aligners, GCA 6300 DSW Stepper, Heidelberg DWL-66 Laser Lithography, Tousimis 915B Critical Point Dryer, Dynatex GST-150 Scriber/Breaker, WestBond 7476D Wire Bonder, XeF<sub>2</sub> Silicon Etcher. He is also responsible for overlooking the Wet Chemistry Room and Optical Lithography rooms.		Bert Mendoza is the Lab Coordinator and the Safety Officer for The Kavli Nanoscience Institute (KNI) at The California Institute of Technology. In his role he assists with daily laboratory operations, training new KNI laboratory members and maintaining KNI laboratory supplies. Direct equipment responsibilities include: Suss MA6/BA6 Mask Aligners, GCA 6300 DSW Stepper, Heidelberg DWL-66 Laser Lithography, Tousimis 915B Critical Point Dryer, Dynatex GST-150 Scriber/Breaker, WestBond 7476D Wire Bonder, XeF<sub>2</sub> Silicon Etcher. He is also responsible for overlooking the Wet Chemistry Room and Optical Lithography rooms.

	Bert joined Caltech in ~~May~~ 2017 in his current role at the KNI.		Bert joined Caltech in March 2017 in his current role at the KNI.

	===== Experience =====		===== Experience =====

Bertm: /* Experience */

2019-05-29T14:35:38Z

Experience

← Older revision		Revision as of 14:35, 29 May 2019
Line 20:		Line 20:
	Bert worked for Sepulveda Investment Properties as a Maintenance Technician from 2007 to 2012. Part of his duties included: General Construction, Installation of Mechanical Equipment and Maintaining Rental Properties.		Bert worked for Sepulveda Investment Properties as a Maintenance Technician from 2007 to 2012. Part of his duties included: General Construction, Installation of Mechanical Equipment and Maintaining Rental Properties.

	Bert has worked for Rockwell International, Conexant and Jazz Semiconductor in the Newport Beach facility for over 25 years combined. Most of his experience from the Process Engineering Department. Areas of experience include: Photolithography, Wet and Dry Etching, Thin Films (furnace and deposition tools), Ion Implant, Final Device Testing and Chemical Mechanical Polishing.		Bert has worked for Rockwell International, Conexant and Jazz Semiconductor in the Newport Beach facility for over 25 years combined. Most of his experience is from the Process Engineering Department. Areas of experience include: Photolithography, Wet and Dry Etching, Thin Films (furnace and deposition tools), Ion Implant, Final Device Testing and Chemical Mechanical Polishing.

	== List of Managed Instruments ==		== List of Managed Instruments ==

Bertm: /* Experience */

2019-05-29T14:34:37Z

Experience

← Older revision		Revision as of 14:34, 29 May 2019
Line 20:		Line 20:
	Bert worked for Sepulveda Investment Properties as a Maintenance Technician from 2007 to 2012. Part of his duties included: General Construction, Installation of Mechanical Equipment and Maintaining Rental Properties.		Bert worked for Sepulveda Investment Properties as a Maintenance Technician from 2007 to 2012. Part of his duties included: General Construction, Installation of Mechanical Equipment and Maintaining Rental Properties.

	Bert has worked for Rockwell International, Conexant and Jazz Semiconductor in the Newport Beach facility for over 20 years combined. Most of his experience from the Process Engineering Department. Areas of experience include: Photolithography, Wet and Dry Etching, Thin Films (furnace and deposition tools), Ion Implant, Final Device Testing and Chemical Mechanical Polishing.		Bert has worked for Rockwell International, Conexant and Jazz Semiconductor in the Newport Beach facility for over 25 years combined. Most of his experience from the Process Engineering Department. Areas of experience include: Photolithography, Wet and Dry Etching, Thin Films (furnace and deposition tools), Ion Implant, Final Device Testing and Chemical Mechanical Polishing.

	== List of Managed Instruments ==		== List of Managed Instruments ==

Derose: /* Role in the KNI */

2019-05-29T14:24:57Z

Role in the KNI

← Older revision		Revision as of 14:24, 29 May 2019
Line 11:		Line 11:
	== About ==		== About ==
	===== Role in the KNI =====		===== Role in the KNI =====
	Bert Mendoza is the Lab Coordinator and the Safety Officer for The Kavli Nanoscience Institute at ~~the~~ California Institute of Technology. In his role he assists with daily laboratory operations, training new KNI laboratory members and maintaining KNI laboratory supplies. Direct equipment responsibilities include: Suss MA6/BA6 Mask Aligners, GCA 6300 DSW Stepper, Heidelberg DWL-66 Laser Lithography, Tousimis 915B Critical Point Dryer, Dynatex GST-150 Scriber/Breaker, WestBond 7476D Wire Bonder, XeF<sub>2</sub> Silicon Etcher. He is also responsible for overlooking the Wet Chemistry Room and Optical Lithography rooms.		Bert Mendoza is the Lab Coordinator and the Safety Officer for The Kavli Nanoscience Institute (KNI) at The California Institute of Technology. In his role he assists with daily laboratory operations, training new KNI laboratory members and maintaining KNI laboratory supplies. Direct equipment responsibilities include: Suss MA6/BA6 Mask Aligners, GCA 6300 DSW Stepper, Heidelberg DWL-66 Laser Lithography, Tousimis 915B Critical Point Dryer, Dynatex GST-150 Scriber/Breaker, WestBond 7476D Wire Bonder, XeF<sub>2</sub> Silicon Etcher. He is also responsible for overlooking the Wet Chemistry Room and Optical Lithography rooms.

	Bert joined Caltech in May 2017 in his current role at the KNI.		Bert joined Caltech in May 2017 in his current role at the KNI.

Bertm: /* Experience */

2019-05-28T22:26:42Z

Experience

← Older revision		Revision as of 22:26, 28 May 2019
Line 16:		Line 16:

	===== Experience =====		===== Experience =====
	~~Nunc mi ipsum faucibus vitae~~. ~~Ipsum nunc aliquet bibendum enim facilisis gravida neque~~. ~~Sapien nec sagittis aliquam malesuada bibendum~~. ~~Vel fringilla est ullamcorper eget nulla facilisi etiam dignissim diam~~.		Before working for the Kavli Nanoscience Institute, Bert worked for Caelux Corporation for 5 years as a Process Engineer. He also processed in the KNI as a Corporate Member during that time. At Caelux, Bert maintained the lab equipment and support systems for the cleanroom laboratory along with his duties of processing Silicon wafers.
	~~nullam~~. ~~Ipsum nunc aliquet bibendum enim facilisis~~.
			Bert worked for Sepulveda Investment Properties as a Maintenance Technician from 2007 to 2012. Part of his duties included: General Construction, Installation of Mechanical Equipment and Maintaining Rental Properties.

			Bert has worked for Rockwell International, Conexant and Jazz Semiconductor in the Newport Beach facility for over 20 years combined. Most of his experience from the Process Engineering Department. Areas of experience include: Photolithography, Wet and Dry Etching, Thin Films (furnace and deposition tools), Ion Implant, Final Device Testing and Chemical Mechanical Polishing.

	== List of Managed Instruments ==		== List of Managed Instruments ==

Derose: /* Role in the KNI */

2019-05-28T22:01:13Z

Role in the KNI

← Older revision		Revision as of 22:01, 28 May 2019
Line 11:		Line 11:
	== About ==		== About ==
	===== Role in the KNI =====		===== Role in the KNI =====
	Bert Mendoza is the Lab Coordinator and the Safety Officer for The Kavli Nanoscience Institute at the California Institute of Technology. In his role he assists with daily laboratory operations, training ~~New~~ KNI laboratory members' and maintaining KNI laboratory supplies. Direct equipment responsibilities include: Suss MA6/BA6 Mask Aligners, GCA 6300 DSW Stepper, Heidelberg DWL-66 Laser Lithography, Tousimis 915B Critical Point Dryer, ~~Dyntatex~~ GST-150 ~~Sriber~~/Breaker, WestBond 7476D Wire Bonder, ~~XeF2~~ Silicon Etcher. He is also responsible for overlooking the Wet Chemistry Room and Optical Lithography rooms.		Bert Mendoza is the Lab Coordinator and the Safety Officer for The Kavli Nanoscience Institute at the California Institute of Technology. In his role he assists with daily laboratory operations, training new KNI laboratory members and maintaining KNI laboratory supplies. Direct equipment responsibilities include: Suss MA6/BA6 Mask Aligners, GCA 6300 DSW Stepper, Heidelberg DWL-66 Laser Lithography, Tousimis 915B Critical Point Dryer, Dynatex GST-150 Scriber/Breaker, WestBond 7476D Wire Bonder, XeF<sub>2</sub> Silicon Etcher. He is also responsible for overlooking the Wet Chemistry Room and Optical Lithography rooms.

	Bert joined Caltech in May 2017 in his current role at the KNI.		Bert joined Caltech in May 2017 in his current role at the KNI.